Andrews Water Heaters has supplied a SOLARflo solar thermal water heating system, together with two OFS163 oil-fired storage water heaters, to provide energy efficient hot water for the brand new dormitory block at Brymore School of Rural Technology in Cannington, Somerset.
Brymore School, which provides education for boys aged 13-17 years, differs from many other secondary schools as it offers a hands-on experience for learning through its organic working farm and gardens. In addition to normal classroom work, pupils are involved in four principle areas of development: the farm, the workshop, the garden and sport. The new accommodation building therefore required a robust hot water system as it will need to be available throughout the day and night for showers, depending on outdoor activities and responsibilities. It would also need to provide sufficient water for peak usage, as groups of students would be preparing for and returning from activities at the same time.
One of the main specifications for the new building was the use of LZC (Low/ Zero Carbon) technologies, maximising energy efficiency and the use of renewable resources.
Heat Radiation Ltd, the contractors for the project, looked to Andrews to fulfil this requirement for the hot water system. Seven SOLARflo glazed flat plate aluminium tray solar collectors were fitted at the same angle as the roof, roughly 20 degrees, to optimise their energy efficiency.
The roof incorporates Northern Lights, designed to further increase the environmental credentials of the building by allowing plenty of natural light to enter and reducing reliance on electricity. The two OFS163 water heaters are installed in a plant room adjoining the accommodation block and serve 30 basins, 20 showers and four baths located throughout the building.
Chris Gray of Heat Radiation Ltd commented: “We have used Andrews water heaters frequently over the years as we have always found them to be reliable and efficient with good technical back up, which is why we were confident in specifying the SOLARflo solar thermal package for this project as well. The installation at Brymore School was simple and straightforward.”