Belimo Energy Valve™. Know where the energy is going.

Belimo Energy Valve™. Know where the energy is going.
Five functions in one valve – including energy monitoring. New with energy monitoring Two sensors now measure the temperatures in the supply and return pipework.

Together with the flow rate that is also recorded, the Energy Valve also provides continuous determination of energy consumption. You can view these values on site per laptop via the Web server integrated in the actuator or via the management system, and retrace them 13 months back. This enables the energy balance of the heating/cooling system to be monitored and optimised in a targeted manner as needed. The volumetric flows can be adjusted individually by means of the Web server (interface RJ45-Ethernet)
or per management system (between 45 and 100%, smallest controllable amount of water: 2.5%).

Gain time and efficiency

The Energy Valve is the next logical development of the electronically controlled, pressure-independent characterised control valve EPIV from Belimo. Like the EPIV, it can measure, control, balance and shut. This makes the valve design considerably simpler. The flow rate is electronically measured and balanced on a permanent basis, which optimises consumption and markedly reduces the time required for hydraulic balancing. The characterising disk, which has already proven itself millions of times over, ensures an equal percentage valve characteristic curve, and the absolute tight-closing valve prevents circulation losses in the water circuit.